《電子技術應用》
您所在的位置:首頁 > 通信與網絡 > 解決方案 > FreescaleMC33662汽車LIN總線連接解決方案

FreescaleMC33662汽車LIN總線連接解決方案

2011-09-29
作者:Freescale
關鍵詞: 汽車電子 LIN總線 CAN總線

Freescale公司的MC33662是汽車LIN總線,支持汽車網絡,和LIN協議標準1.3, 2.0, 2.1和SAEJ2602-2CAN兼容,工作電壓VSDUP 7-18VDC,功能高達27VDC,在卸載時能處理40V,LIN總線能經受15.0kV ESD IEC61000-4-2,WAKE引腳能經受20kV ESD,VSUP引腳能經受25kV ESD,目標應用在汽車儀表盤,HVAC,汽車照明,門窗提升和座位控制, 安全氣袋,車體控制模塊和中央網關,駕駛員信息系統和動力總成于混合系統以及LIN連接系統.本文介紹了MC33662主要特性,簡化方框圖,應用電路以及主/從節點典型應用電路.

The Local Interconnect Network (LIN) is a serial communication protocol, designed to support automotive networks in conjunction with a Controller Area Network (CAN). As the lowest level of a hierarchical network, LIN enables cost-effective communication with sensors and actuators when all the features of CAN are not required. The three 33662 versions are designed to operate at different maximum baud rates. The MC33662LEF and MC33662SEF offer a normal baud rate (20 kbps), and the MC33662JEF, a slow baud rate (10 kbps). They integrate a fast baud rate (above 100 kbps), as reported by the RXD pin for test and programming modes. They provide excellent EMC (Electromagnetic Compatibility) and Radiated Emission performance, ESD (Electrostatic Discharge) robustness, and safe behavior, in the event of a LIN bus short-to-ground, or a LIN bus leakage during low-power mode.

MC33662主要特性:

•Operational from a VSUP of 7.0 to 18V DC, functional up to 27V DC, and handles 40 V during Load Dump

•Compatible with LIN Protocol Specification 1.3, 2.0, 2.1, and SAEJ2602-2

•Active bus wave shaping, offering excellent radiated emission performance

•Sustains up to 15.0 kV minimum ESD IEC61000-4-2 on the LIN Bus, 20 kV on the WAKE pin, and 25 kV on the VSUP pin

•Very high immunity against electromagnetic interference

•Low standby current in Sleep mode

•Over-temperature protection

•Local and remote Wake-up capability reported by the RXD pin

•Fast baud rate selection reported by RXD pin

•5.0 V and 3.3 V compatible digital inputs without any required external components

MC33662目標應用:

Automotive

Instrument Cluster

Heating Ventilation and Air Conditioning (HVAC)

Automotive Lighting

Doors, Window Lift and Seat Control

Airbags

Body Control Module and Central Gateway

Body Electronics

Driver Information Systems

Powertrain and Hybrid Systems

Gasoline and Diesel Engine Management

Hybrid Electric Vehicles

Body Electronics

Driver Information Systems

Powertrain and Hybrid Systems

Connectivity

Local Interconnect Network (LIN)

圖1.MC33662簡化方框圖

圖2.MC33662 LIN接口

圖3.MC33662主LIN總線簡化應用電路圖

圖4.MC33662主節點典型應用電路

圖5.MC33662從節點典型應用電路
詳情請見:
http://www.freescale.com/files/analog/doc/data_sheet/MC33662.pdf



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。