《電子技術應用》
您所在的位置:首頁 > 微波|射频 > 设计应用 > 一种低功耗便携式宽带射频信号检测笔的设计
一种低功耗便携式宽带射频信号检测笔的设计
电子技术应用
贾博,张润林
中国电子科技集团公司第五十八研究所
摘要: 以便携性低功耗为出发点,创新性地首次提出了检测笔形态的便携式射频信号简易测试仪,以解决高寒、高空、高热或者高海拔地区等特殊环境下检修通信设备时,携带常规实验室测试设备存在不便操作、危险性较高、插电困难等难题,该检测笔一方面显著减轻了恶劣环境中携带复杂检测仪器的负担,另一方可以将节约出来的空间和精力携带其他重要的工作物件。经试验测试,该检测笔能实现对频率为1 GHz~23 GHz、功率范围在-45 dBm~+3 dBm的射频信号的有效检测,试验结果与理论设计一致,验证了该方法的可行性和高效性。
中圖分類號:TN854 文獻標志碼:A DOI: 10.16157/j.issn.0258-7998.256975
中文引用格式: 賈博,張潤林. 一種低功耗便攜式寬帶射頻信號檢測筆的設計[J]. 電子技術應用,2026,52(1):103-106.
英文引用格式: Jia Bo,Zhang Runlin. A design of low-power portable broadband radio frequency signal detection pen[J]. Application of Electronic Technique,2026,52(1):103-106.
A design of low-power portable broadband radio frequency signal detection pen
Jia Bo,Zhang Runlin
China KEY SYSTEM & Integrated Circuit Co., Ltd.
Abstract: This paper, prioritizing portability and low power consumption, innovatively proposes a pen-shaped portable RF signal detection pen for the first time. It aims to address the challenges of inspecting and repairing communication equipment in extreme environments such as high-cold, high-altitude, high-temperature, or high-latitude regions, where carrying conventional laboratory equipment is inconvenient, hazardous, and difficult to power. The proposed detection pen not only significantly reduces the burden of carrying complex detection instruments in harsh environments but also allows for the conservation of space and energy for carrying other essential items. Experimental tests demonstrate that the detection pen can effectively detect RF signals within the frequency range of 1~23 GHz and power range of -45 dBm to +3 dBm. The experimental results are consistent with the theoretical design, thereby validating the feasibility and efficiency of the proposed method.
Key words : environment;portable;low-power;broadband detection

引言

中國各地的地貌復雜多樣,在信息化飛速發展的今天,通信電子設備基礎設施種類繁多,如中國的北斗衛星定位系統地面站、各類移動通信基站、移動衛星通信站等[1-4]。但是某些通信電子設備的工作環境特殊,具備高溫、高寒、高海拔等特點,設備維護檢修條件有限,檢修工具的便攜性、通用性和可操作性至關重要。

目前,關于通信電子設備檢修,設備廠家一般采用兩種辦法進行:第一種是通過工作人員攜帶實驗室測試儀器進行現場作業;第二種是將設備返廠檢修?,F場作業時,進行檢修的工作人員需要攜帶實驗室測試儀器,這些儀器具備出色的性能和豐富的功能,通常設計復雜且笨重,通信設備工作在非常惡劣的環境中時,也無法攜帶實驗室儀器,設備檢修只能返廠進行。產品返廠檢修會延長檢修周期,且在設備檢修過程中,設備安裝地存在通信中斷的可能,無法滿足人們的使用需求。因此必須尋求一種檢測結果可視化程度高、操作簡便、功耗低、重量輕、體積小、通用化的便攜式檢測儀[5]。檢測筆形態的測試儀具有以上特點[6]。

本文創新性地設計了一種低功耗便攜式寬帶射頻信號檢測筆,用于解決通信電子設備檢修時射頻前端電路中射頻信號幅度的探測。本文首先介紹了檢測筆方案原理,然后針對檢測筆實現功能過程中三個關鍵步驟進行闡述,即信號檢測、信號處理和信號可視化。


本文詳細內容請下載:

http://ihrv.cn/resource/share/2000006921


作者信息:

賈博,張潤林

(中國電子科技集團公司第五十八研究所,四川 成都 610097)


官方訂閱.jpg

此內容為AET網站原創,未經授權禁止轉載。