中圖分類號：TP399；TU17 文獻標志碼：A DOI: 10.16157/j.issn.0258-7998.256625 中文引用格式： 馬迪，宋晉，高飛. 軸網聚類在樓棟關鍵尺寸計算中的應用研究[J]. 電子技術應用，2026，52(2)：71-76. 英文引用格式： Ma Di，Song Jin，Gao Fei. Calculating the building size based on axis grid clustering[J]. Application of Electronic Technique，2026，52(2)：71-76.
Calculating the building size based on axis grid clustering
Ma Di1， Song Jin1， Gao Fei1
1.Zhejiang University of Technology Engineering Design Group Co.，Ltd.；2.Zhejiang University of Technology
Abstract： Due to the low efficiency, easy omission or misjudgment of manual inspection, automatic drawing review based on BIM models has received increasing attention, and how to automatically calculate building size is one of the key issues. In this paper, a new method for calculating key building size is proposed. Firstly, through intelligent clustering analysis of the axis grid in the Revit model, the geometric relationships and spatial layouts of various building units in complex building structures are automatically identified and organized. Then, the relevant elevations of the specified building are filtered out through regular expressions and the type is determined. Finally, by comparing the area of the roof layer and the roof of the computer room, the accurate building height can be obtained. The testing in actual engineering scenarios on the Revit platform verifies that the proposed method can enhance the consistency and accuracy of BIM model data.
Key words : BIM；secondary development of Revit；clustering analysis；axis grid；building size calculation
引言
當前，建筑信息模型（Building Information Model，BIM）技術已經從概念階段發展為實際項目管理與設計的核心工具[1]。在這一背景下，進一步完善BIM模型的標準規范，有助于保證建設生命周期內信息傳遞的一致性與準確性[2]。由于人工檢查存在效率低、易遺漏或誤判等問題，BIM模型驅動的自動化圖紙審查受到越來越多的關注，如何自動計算樓棟尺寸成為其中的關鍵問題之一[3-4]。作為在BIM模型的重要部分，樓棟尺寸提供了建筑物各樓層、柱梁、墻體等組件在幾何特征、空間關系等方面的信息[5-6]。獲取到精精的樓棟尺寸，有助于實現自動優化設計、自動排布、沖突檢測、施工模擬、性能分析、合規性檢查等[7-10]，進而提升項目的整體質量控制和合規性水平。因此，本文旨在研究一種創新的Revit擴展開發技術，聚焦于在建筑設計階段實現樓棟尺寸計算自動化。采用智能聚類分析技術處理Revit模型中的軸網信息，利用算法自動識別并組織復雜建筑結構中各個樓棟單元之間的幾何關聯及空間配置，并借助Revit API和正則匹配，獲取到精確的樓棟尺寸。通過這種方法論的探索和實施，不僅能夠在建筑設計初期階段有效提升工作效率，降低人為失誤，還能夠為后續的施工深化設計、規范條文制定提供更為嚴謹?shù)臄?shù)據基礎和技術支撐，助力推動整個建筑業邁向更高效、更精準的設計與建造新紀元。
