中圖分類號：TN929.1 文獻標志碼：A DOI: 10.16157/j.issn.0258-7998.222942
中文引用格式： 劉杰徽，甘若宏，甘智宇，等. 基于FPGA的多通道可見光通信系統的設計與實現[J]. 電子技術應用，2023，49(3)：147-152.
英文引用格式： Liu Jiehui，Gan Ruohong，Gan Zhiyu，et al. Design and implementation of multi-channel visible light communication system based on FPGA[J]. Application of Electronic Technique，2023，49(3)：147-152.

Design and implementation of multi-channel visible light communication system based on FPGA

Abstract： Compared with traditional radio frequency communication, visible light has rich spectrum resources and high security. The multi-channel visible light communication system designed in this paper is divided into transmitter and receiver. Based on Verilog HDL language, the channel distribution module, transparent framing module, channel code block segmentation module at the transmitter, transparent framing module and channel merging module at the receiver are designed in detail, and a multi-channel visible light communication system that supports 16 channels of data at the same time is realized. In order to meet the demand of the high-speed communication of the system, the transmitter / receiver circuit of visible light communication is designed and optimized, and the pre emphasis circuit is used at the transmitter to effectively compensate the channel loss. In the receiver, a T-shaped amplification circuit composed of resistance and capacitance is used to compensate the attenuated signal. Finally, the test is carried out on the experimental platform. The results show that the transmission error rate of the multi-channel visible light communication system designed in this paper is not greater than 10-9, and the single channel transmission rate is not less than 30 Mb/s. This research is conducive to improving the reliability and high speed of the visible light communication system.

Key words : multichannel；visible light communication；bit error rate；transmission speed