《電子技術應用》
您所在的位置:首頁 > 模擬設計 > 設計應用 > 一種SOE信息收集算法的設計與實現
一種SOE信息收集算法的設計與實現
2020年電子技術應用第10期
荊宇辰1,張?jiān)獛r2
1.哈爾濱工業大學(威海) 計算機科學與技術學院,山東 威海264209; 2.中國電子信息產業集團有限公司第六研究所,北京100083
摘要: 事件順序記錄(Sequence Of Event,SOE)在DCS分布式控制系統中用于分析生產過程中的停機故障,從而獲取事故原因。設計了一種SOE信息的采集方法,分別介紹了系統總體結構設計、軟件部署、控制器通信軟件與上位機軟件的通信、模板采集軟件設計、時統系統設計,著重介紹了時間標簽的算法實現以及跳變測點的定位。該系統實時性高、算法合理,已經廣泛應用于電力工業領域。
中圖分類號: TN919.5
文獻標識碼: A
DOI:10.16157/j.issn.0258-7998.200386
中文引用格式: 荊宇辰,張?jiān)獛r. 一種SOE信息收集算法的設計與實現[J].電子技術應用,2020,46(10):102-105.
英文引用格式: Jing Yuchen,Zhang Yuanyan. The design and implementation on the algorithm acquiring SOE data[J]. Application of Electronic Technique,2020,46(10):102-105.
The design and implementation on the algorithm acquiring SOE data
Jing Yuchen1,Zhang Yuanyan2
1.School of Computer Science and Technology,Harbin Institute of Technology,Weihai 264209,China; 2.The 6th Research Institute of China Electronics Corporation,Beijing 100083,China
Abstract: SOE(Sequence Of Event) is used to analyze fault in order to find the cause of the accident in the DCS(distributed control system). In this paper, an acquisition way of the SOE information is studied, it introduces the general structure of the distributed control system, the software deployment of the SOE acquisition system,the communication way between the controller and the operation station, the design technique of the timing system, and the capturing software in the card. This paper focuses on the algorithm through which acquiring the time label of the SOE and the tag positioning method. The acquisition system has been widely applied to the field of the electric power industry, which has the characteristics of high real-time performance and the reasonable algorithm.
Key words : SOE;DCS(distributed control system);time label

0 引言

    在電力、石化、造紙、水泥等重要工業領域中,DCS分布式控制系統[1]被廣泛應用。當在系統聯調或生產運行過程中發生停機停車故障,用戶需要通過DCS平臺獲取事故原因,而這些項目的工藝過程復雜、實時性高,一般的報警記錄和歷史趨勢都是記錄到秒級,無法用來做出準確的事故原因分析,因此事件順序記錄(Sequence Of Event,SOE)成為DCS系統的必需功能,且分辨率一般要求達到毫秒級。本文從軟件角度介紹了一種DCS系統獲取SOE信息的采集方法,并詳細分析了SOE時間標簽的生成算法。




本文詳細內容請下載:http://ihrv.cn/resource/share/2000003032




作者信息:

荊宇辰1,張?jiān)獛r2

(1.哈爾濱工業大學(威海) 計算機科學與技術學院,山東 威海264209;

2.中國電子信息產業集團有限公司第六研究所,北京100083)

此內容為AET網站原創,未經授權禁止轉載。