《電子技術應用》
您所在的位置:首頁 > 模擬設計 > 解決方案 > MaximMAX7034ASK數據接收器參考設計

MaximMAX7034ASK數據接收器參考設計

2012-05-31
作者:Maxim公司
</a>家庭自動化" title="家庭自動化">家庭自動化" title="家庭自動化">家庭自動化,遙控,無線傳感器,遙測等.本文介紹了MAX7034主要特性,方框圖,典型應用電路以及接收器參考設計電路圖,材料清單和PCB布局圖.

The MAX7034 fully integrated low-power CMOS superheterodyne receiver is ideal for receiving amplitudeshift-keyed (ASK) data in the 300MHz to 450MHz frequency range (including the popular 315MHz and 433.92MHz frequencies). The receiver has an RF sensitivity of -114dBm. With few external components and a low-current power-down mode, it is ideal for cost-sensitive and power-sensitive applications typical in the automotive and consumer markets. The MAX7034 consists of a low-noise amplifier (LNA), a fully differential image-rejection mixer, an on-chip phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI), and analog baseband data-recovery circuitry.

The MAX7034 is available in a 28-pin (9.7mm x 4.4mm) TSSOP package and is specified over the automotive (-40℃ to +125℃) temperature range.

MAX7034主要特性:

_ Optimized for 315MHz or 433.92MHz Band

_ Operates from Single +5.0V Supply

_ Selectable Image-Rejection Center Frequency

_ Selectable x64 or x32 fLO/fXTAL Ratio

_ Low (< 6.7mA) Operating Supply Current

_ < 3.0μA Low-Current Power-Down Mode for Efficient Power Cycling

_ 250μs Startup Time

_ Built-In 44dB RF Image Rejection

_ Excellent Receive Sensitivit

MAX7034應用:

Automotive Remote

Keyless Entry

Security Systems

Garage Door Openers

Home Automation

Remote Controls

Local Telemetry

Wireless Sensors

圖1. MAX7034方框圖

圖2. MAX7034典型應用電路圖

MAX7034接收器參考設計

The MAX7034 receiver reference design (RD) is a self-contained evaluation platform for exercising the product as a tube motor receiver module. This receiver (Rx) board includes a simple power supply, data interface, and an antenna connection, all in a small modular form師factor that allows the receiver to be placed inside of a tubular enclosure. The Rx board was manufactured to be usable as-is. Gerber files are available for simple cut-and-paste of the radio system design.

The MAX7034 315MHz/434MHz amplitude-shift-keyed (ASK) superheterodyne receiver is configured in a near-standard form similar to the typical application circuit illustrated in the MAX7034 data sheet. The system is targeted for 433.92MHz operation and a 1kbps (NRZ) data rate. Four resistor connections are included in the design to allow flexible use of certain pins. Two connections have resistor footprints but are wired as shorts: R5 connects IR_SEL to VDD and R6 connects EN_REG to VDD.

Two other connections are left open (unpopulated): R4 can connect DSP to DATAOUT for hysteresis and R7 can connect DSN to 3V3 for squelch. The module is designed to have a small footprint with minimal connections, to include a pair of pins for antenna/ground connections and a triplet of pins for ground/RX data/power connections. The board uses a 5V power supply.


圖3. MAX7034接收器參考設計A2外形圖
 
圖4. MAX7034接收器參考設計電路圖
Rx板材料清單:


圖5. MAX7034接收器板PCB布局圖
詳情請見:
http://datasheets.maxim-ic.com/en/ds/MAX7034.pdf

http://pdfserv.maxim-ic.com/en/an/REFD5390.pdf



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。