Linear公司的LTC4313是熱插拔兩線雙向總線緩沖器,噪音容限高達0.3VCC,支持電壓1.5V, 1.8V, 2.5V, 3.3V 和5V,在插入時, SDA和SCL線能預充電到1V以最小化對總線的干擾.器件和I2C,I2C快速模式和SMBus兼容, ±4kV人體模式ESD保護,主要用在容性緩沖器/總線擴展器,板熱插拔,包括ATCA的通信系統,電平轉換,PMBus和服務器.本文介紹了LTC4313主要特性,方框圖,以及多種應用電路.

The LTC4313 is a hot swappable 2-wire bus buffer that provides bidirectional buffering while maintaining a low offset voltage and high noise margin up to 0.3 • VCC. The high noise margin allows the LTC4313 to be interoperable with devices that drive a high VOL (>0.4V) and allows multiple LTC4313s to be cascaded. The LTC4313-1 and LTC4313-2 support level translation between 3.3V and 5V busses. In addition to these voltages, the LTC4313-3 also supports level translation to 1.5V, 1.8V and 2.5V.

During insertion, the SDA and SCL lines are pre-charged to 1V to minimize bus disturbances. Connection is established between the input and output after ENABLE is asserted high and a stop bit or bus idle condition has been detected on the SDA and SCL pins. If both data and clock are not simultaneously high at least once in 45ms, the input is disconnected from the output. Up to 16 clock pulses are subsequently generated to free the stuck bus. Rise time accelerators (RTAs) provide pull-up currents on SDA and SCL rising edges to meet rise time specifications in heavily loaded systems. The RTAs are configured as slew limited switches in the LTC4313-1 and 2.5mA current sources in the LTC4313-2. The LTC4313-3 does not have RTAs.

LTC4313主要特性:

Bidirectional Buffer Increases Fanout

High Noise Margin with VIL = 0.3•VCC

Compatible with Non-Compliant I2C Devices That Drive a High VOL

Strong (LTC4313-1) and 2.5mA (LTC4313-2) Rise Time Accelerator Current

Level Shift 1.5V, 1.8V, 2.5V, 3.3V and 5V Busses

Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane

Stuck Bus Disconnect and Recovery

Compatible with I2C, I2C Fast Mode and SMBus

±4kV Human Body Model ESD Ruggedness

High Impedance SDA, SCL Pins When Unpowered

8-Lead MSOP and 8-Lead (3mm × 3mm) DFN Packages

LTC4313應用:

Capacitance Buffers/Bus Extender

Live Board Insertion

Telecommunications Systems Including ATCA

Level Translation

PMBus

Servers

圖1. LTC4313方框圖

圖2. LTC4313典型應用電路圖

圖3. LTC4313帶連接器的I2C熱插拔應用電路圖

圖4.采用LTC4313-3從3.3V到1.8V的電平轉移電路圖

圖5.LTC4313在總線ATCA中應用電路(僅顯示一路時鐘)

圖6.LTC4313-2在放射狀地連接(6x4列)通信系統的應用

圖7.LTC4313-1和其它LTC緩沖器級聯的應用電路

圖8.LTC4313和非兼容I2C器件的通信

圖9.LTC4313在轉發器中的應用
詳情請見:
http://cds.linear.com/docs/Datasheet/4313123f.pdf