</a>LED" title="LED">LED" title="LED">LED驅動器和振蕩器,四線串行接口,無源元件熟最少.主要用在有線和無線光學游戲鼠標和跟蹤球,綜合輸入設備和以電池為能源的輸入設備.本文介紹了ADNS-3050主要特性, 光學鼠標框圖, 2D裝配圖和裝配分解圖,以及有線和無線解決方案電路圖.
ADNS-3050: Entry-level Gaming Optical Navigation Sensor
The Avago Technologies ADNS-3050 is a small form factor entry-level gaming optical navigation sensor. It is housed in an 8-pin staggered dual in-line package (DIP). It is capable of high-speed motion detection typically at 60ips and acceleration up to 20g; suitable for both wired and wireless gaming navigation system. The low power management in wireless mode can be customized to suit user preferences. In addition, it has an on-chip oscillator and LED driver to minimize external components.
The ADNS-3050 sensor along with the ADNS-5110-001 lens, ADNS-5200 clip, and HLMP-EG3E red LED forms a complete and compact mouse tracking system. There are no moving parts, which translates to high reliability and less maintenance for the end user. Precision optical alignment is not required, thus facilitating high volume assembly.
Theory of Operation
The ADNS-3050 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement. The ADNS-3050 contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the ΔX and Δy relative displacement values. An external microcontroller reads and translates the ΔX and Δy information from the sensor serial port into PS2, USB, or RF signals before sending them to the host PC.
ADNS-3050主要特性:
??Small Form Factor Package - 8-pin DIP
??Operating Voltage: 2.8V-3.0V
??High Speed Motion Detection at typical of 60ips and acceleration up to 20g.
??Selectable Resolutions up to 2000cpi
??Four wire Serial Port Interface
??External Interrupt Output for Motion Detection
??Internal Oscillator — no clock input needed
??On-chip LED driver
??Minimal number of passive components
??Programmable power-saving modes for selectable wired or wireless application
??Customizable response time and downshift time for rest modes
??Confi gurable LED operating modes and drive current
ADNS-3050應用:
??Wired and Wireless Optical gaming mice and trackballs
??Integrated input devices
??Battery-powered input devices
圖1.ADNS-3050 2D裝配圖(頂和側視圖)
圖2.ADNS-3050 裝配分解圖
圖3.ADNS-3050 光學鼠標框圖
圖4.ADNS-3050和帶 HLMP-EG3E 紅光LED MCU接口的有線解決方案電路圖
圖4.ADNS-3050和帶 HLMP-EG3E 紅光LED MCU接口的無線解決方案電路圖
詳情請見:
http://www.avagotech.com/docs/AV02-2886E
ADNS-3050: Entry-level Gaming Optical Navigation Sensor
The Avago Technologies ADNS-3050 is a small form factor entry-level gaming optical navigation sensor. It is housed in an 8-pin staggered dual in-line package (DIP). It is capable of high-speed motion detection typically at 60ips and acceleration up to 20g; suitable for both wired and wireless gaming navigation system. The low power management in wireless mode can be customized to suit user preferences. In addition, it has an on-chip oscillator and LED driver to minimize external components.
The ADNS-3050 sensor along with the ADNS-5110-001 lens, ADNS-5200 clip, and HLMP-EG3E red LED forms a complete and compact mouse tracking system. There are no moving parts, which translates to high reliability and less maintenance for the end user. Precision optical alignment is not required, thus facilitating high volume assembly.
Theory of Operation
The ADNS-3050 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement. The ADNS-3050 contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the ΔX and Δy relative displacement values. An external microcontroller reads and translates the ΔX and Δy information from the sensor serial port into PS2, USB, or RF signals before sending them to the host PC.
ADNS-3050主要特性:
??Small Form Factor Package - 8-pin DIP
??Operating Voltage: 2.8V-3.0V
??High Speed Motion Detection at typical of 60ips and acceleration up to 20g.
??Selectable Resolutions up to 2000cpi
??Four wire Serial Port Interface
??External Interrupt Output for Motion Detection
??Internal Oscillator — no clock input needed
??On-chip LED driver
??Minimal number of passive components
??Programmable power-saving modes for selectable wired or wireless application
??Customizable response time and downshift time for rest modes
??Confi gurable LED operating modes and drive current
ADNS-3050應用:
??Wired and Wireless Optical gaming mice and trackballs
??Integrated input devices
??Battery-powered input devices
圖1.ADNS-3050 2D裝配圖(頂和側視圖)
圖2.ADNS-3050 裝配分解圖
圖3.ADNS-3050 光學鼠標框圖
圖4.ADNS-3050和帶 HLMP-EG3E 紅光LED MCU接口的有線解決方案電路圖
圖4.ADNS-3050和帶 HLMP-EG3E 紅光LED MCU接口的無線解決方案電路圖
詳情請見:
http://www.avagotech.com/docs/AV02-2886E
本站內容除特別聲明的原創(chuàng)文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創(chuàng)文章及圖片等內容無法一一聯(lián)系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯(lián)系電話：010-82306118；郵箱：aet@chinaaet.com。