《電子技術應用》
您所在的位置:首頁 > 其他 > 設計應用 > Allegromicro A4980汽車步進馬達驅動方案
Allegromicro A4980汽車步進馬達驅動方案
摘要: Allegromicro公司的A4980是可編程的汽車微步進馬達驅器,驅車電壓高達28V,驅動電流±750mA.設計用于以滿步,半步,1/4步和1/16步驅動雙向馬達.器件內部集成了OVLO,UVLO和熱關斷電路,主要用在汽車步進馬達,引擎管理和頭燈定位.
Abstract:
Key words :

Allegromicro公司的 A4980是可編程" title="可編程">可編程的汽車微步進馬達" title="步進馬達">步進馬達驅器,驅車電壓高達28V,驅動電流±750 mA.設計用于以滿步,半步,1/4步和1/16步驅動雙向馬達.器件內部集成了OVLO, UVLO和熱關斷電路,主要用在汽車步進馬達,引擎管理和頭燈定位.本文介紹了A4980主要特性和優勢,功能方框圖, 串行和并行接口控制" title="接口控制">接口控制應用電路圖.

The A4980 is a flexible microstepping motor driver with built-in translator for easy operation. It is a single-chip solution, designed to operate bipolar stepper motors in full-, half-, quarter- and sixteenth-step modes, at up to 28 V and ±750 mA. The A4980 can be controlled by simple Step and Direction inputs, or through the SPI-compatible serial interface that also can be used to program many of the integrated features and to read diagnostic information.

The current regulator can be programmed to operate in fixed off-time or fixed frequency PWM, with several decay modes to reduce audible motor noise and increase step accuracy. In addition the phase current tables can be programmed via the serial interface to create unique microstep current profiles to further improve motor performance for specific applications.

The current in each phase of the motor is controlled through a DMOS full bridge, using synchronous rectification to improve power dissipation. Internal circuits and timers prevent crossconduction and shoot-through, when switching between highside and low-side drives.

The outputs are protected from short circuits, and features for low load current and stalled rotor detection are included. Chip-level protection includes: hot and cold thermal warnings, overtemperature shutdown, and overvoltage and undervoltage lockout.

The A4980 is supplied in a 28-pin TSSOP power package with an exposed thermal pad (package type LP). This package is lead (Pb) free with 100% matte-tin leadframe plating.

A4980主要特性和優勢:

• Typical application up to ±750 mA, 28 V

• Low RDS(on) outputs, 0.5 Ω source and sink, typical

• Automatic current decay mode detection/selection

• Mixed, Fast, and Slow current decay modes

• Synchronous rectification for low power dissipation

• Internal OVLO, UVLO, and Thermal Shutdown circuitry

• Crossover-current protection

• Short circuit, and open load diagnostics

• Hot and cold thermal warning

• Stall detect features

• SPI-compatible or simple Step and Direction motion control

• Highly configurable via SPI-compatible serial interface

A4980應用:

• Automotive stepper motors

• Engine management

• Headlamp positioning

圖1. A4980功能方框圖

圖2. A4980串行接口控制應用電路圖

圖3. A4980并行控制應用電路圖
詳情請見
http://www.allegromicro.com/en/Products/Part_Numbers/4980/4980.pdf



此內容為AET網站原創,未經授權禁止轉載。