《電子技術應用》
您所在的位置:首頁 > 顯示光電 > 設計應用 > Semtech SC442高效120個白光LED驅動方案
Semtech SC442高效120個白光LED驅動方案
——
摘要: Semtech 公司的SC442是10路高效120個白光LED驅動器,輸入電壓4.5V-21V,高效的升壓轉換器可使輸出電壓高達42V,非常適合中到大型LCD顯示屏。電流沉可編程,每路高達30mA,路間的電流匹配在+/-1%,集成了3A開關,效率高達91%,可靈活進行LED配置,高達50kHz調光頻率,大于500:1調光范圍,開關頻率500kHz - 1MHz,主要用在汽車LCD背光,臺式監視器,筆記本電腦和手提TV。本文介紹了SC442主要特性和典型應用電路。
Abstract:
Key words :
Semtech 公司的SC442是10路高效120個白光LED驅動器,輸入電壓4.5V-21V,高效的升壓轉換器可使輸出電壓高達42V,非常適合中到大型LCD顯示屏。電流沉可編程,每路高達30mA,路間的電流匹配在+/-1%,集成了3A開關,效率高達91%,可靈活進行LED配置,高達50kHz調光頻率,大于500:1調光范圍,開關頻率500kHz - 1MHz,主要用在汽車LCD背光,臺式監視器,筆記本電腦和手提TV。本文介紹了SC442主要特性和典型應用電路。

SC442:10-Channel, Integrated, High Efficiency 120 White LED Driver

The SC442 is a 10-channel, high efficiency integrated step-up (boost) driver IC capable of powering up to 120 WLEDs. The device has a wide input voltage of 4.5V to 21V with no internal regulator or bypass capacitor required. The wide input range, up to 42V output voltage and flexible implementation make it the ideal LED backlight driver solution for medium to large LCD displays. The current sink channels are programmed with an external resistor up to 30mA each.

Channel-channel current matching is +/-1% . The device disables open or shorted LEDs by disabling only the affected LED channel; thus increasing LCD panel life. Channel-channel LED mismatch voltage is accomodated by adjusting the SCPSET resistor. The current sink channels may be operated in parallel for increased LED current. Unused channels are be disabled by connecting the pin to the input voltage.

Losses in the switching device and current sinks are minimized across the operating range; yielding >90% efficiency and excel­lent battery life for portable systems.

The device accepts PWM dimming up to 50kHz. Maximum dim­ming range is greater than 500:1 with excellent linearity for opti­mum PWM dimming characteristics. The high frequency dimming capability (>20kHz) eliminates audio emissions and allows small ceramic output capacitors.

Switching frequency is programmable from 200kHz to 1MHz; allowing efficiency versus L/C sizing tradeoffs across the input/output voltage range. Alternatively, the SYNC pin allows the designer to synchronize the switching frequency to an external system clock and, if necessary, a parallel SC442 device - eliminating potential system intermodulation and interference problems.

Over-temperature shutdown protects the IC from over-heating under abnormal conditions. The device is available in a small 4mmx4mm MLPQ-28 pin package with 0.6mm maximum height and is fully WEEE and RoHS compliant.

SC442主要特性:

Wide input voltage range from 4.5V to 21V

42V maximum operating output voltage

Programmable LED current up to 30mA per string

+/- 1% current matching

Integrated 3A switch

Low current sink voltage

Up to 91% efficiency

Flexible LED configurations

Mismatched LED channels

Disable individual channel(s)

Parallel channels for high LED current

PWM dimming capability

Up to 50kHz dimming frequency

>500:1 dimming range

Switching frequency: 500kHz - 1MHz

Parallel device operation with Sync Pin

Protection features:

Adjustable OVP

Cycle-by-cycle current limit

LED short channel with disable /Open channnel

Over-Temperature protection

MLPQ-28 lead-free package (WEEE and RoHS compliant), 4×4mm × 0.6mm

SC442應用:

Automotive LCD Backlighting

Desktop monitors

Notebook PCs

Portable TVs

圖1。SC442典型應用電路

此內容為AET網站原創,未經授權禁止轉載。