《電子技術應用》
您所在的位置:首頁 > 電源技術 > 解決方案 > PowerintLNK460VG100WA19LED燈電源方案(DER322)

PowerintLNK460VG100WA19LED燈電源方案(DER322)

2012-03-30
作者:Powerint公司

Powerint公司的DER322參考設計采用LinkSwitch-PL系列LNK460VG器件,是業界首個可替代100W A19白熾燈的LED驅動器,采用單層PCB,具有低成本少元件數和小尺寸特點,230VAC時的效率大于93%,PF大于0.9,230 VAC; 78 V LED時的THD小于20%,集成了包保護和可靠性特性,熱關斷自動恢復。本文介紹了LinkSwitch-PL系列產品亮點,方框圖,典型應用電路以及DER322參考設計主要特性和指標,電路圖,材料清單和PCB布局圖。

The LinkSwitch-PL family enables a very small and low cost single-stage power factor corrected constant current driver for solid state lighting. Optimized for direct LED current sensing, the LinkSwitch-PL operates over a wide input voltage range delivering an output power of up to 16 W. The LinkSwitch-PL control algorithm provides flicker-free TRIAC dimming with minimal external components.

Each device incorporates a 725 V rated power MOSFET, a novel discontinuous mode variable frequency variable on-time controller, frequency jitter, cycle by cycle current limit and hysteretic thermal shutdown in a monolithic 4-pin IC, available in SO-8C, eSOP-12, and eDIP-12 packages.

LinkSwitch-PL系列產品亮點:

Dramatically Simplifies Off-line LED Drivers

• Flicker-free phase-controlled TRIAC dimming

• Single stage power factor correction and accurate constant current (CC) output

• Very low component count with small non-electrolytic bulk capacitor for compact replacement lamp designs

• Compact SO8, eSOP, and eDIP packages

• Completely eliminates control loop compensation

Advanced Performance Features

• Optimized for non-isolated flyback designs

• Frequency jitter greatly reduces EMI filter size and costs

• Low dissipation direct sensing of LED current

Advanced Protection and Safety Features

• Cycle skipping regulation for abnormally low output power to clamp peak output current delivered

• 725 V integrated power MOSFET allows small bulk capacitance and maximizes power capability

• Short-circuit, overload, open feedback and output overvoltage protection

• Hysteretic thermal shutdown

• Meets high-voltage creepage between DRAIN and all other pins both on PCB and at package

EcoSmart™ - Energy Efficient

• High power factor optimizes system lumen per input VA

• Control algorithm balances switching and conduction losses over line and load to maintain optimum efficiency

圖1。LinkSwitch-PL系列功能方框圖

圖2。LinkSwitch-PL系列典型應用電路圖

圖3。采用LinkSwitch-PL系列的替代A19白熾燈的5W 15V LED驅動器電路圖

DER322參考設計

High Efficiency (>93%), High Power Factor(>0.9), 18 W Output Non-Isolated Buck LED Driver Using LinkSwitchTM-PL LNK460VG

The document describes a non-isolated, high efficiency, high power factor (PF) LED driver designed to drive a nominal LED string voltage of 78 V at 230 mA from an input voltage range of 195 VAC to 265 VAC (47 Hz – 63 Hz). The LED driver utilizes the LNK460VG from the LinkSwitch-PL family of ICs.

The topology used is a single-stage non-isolated buck that meets the stringent space and efficiency requirements for this design. LinkSwitch-PL based designs provide high power factor (>0.9) meeting international requirements.

This document contains the LED driver specification, schematic, PCB details, bill of materials, transformer documentation and typical performance characteristics.

DER322參考設計主要特性:

? Single-stage power factor correction combined with constant current (CC) output

? Low cost, low component count, small size and single-sided PCB

? Highly energy efficient, >93% at 230 VAC input for 78 V LED Load

? Integrated protection and reliability features

? Single shot no-load protection / output short-circuit protected with auto-recovery

? Auto-recovering thermal shutdown with large hysteresis protects both components and PCB

? No damage during brown-out conditions

? PF >0.9 at 230 VAC

? % ATHD <20% at 230 VAC; 78 V LED

? Meets IEC ring wave, differential line surge and EN55015 conducted EMI



圖4。DER322參考設計外形圖:上:頂視圖,下:底視圖

DER322參考設計電源指標:


圖5。DER322參考設計電路圖

DER322參考設計材料清單(BOM):




圖6。DER322參考設計PCB布局圖(53.5 mm x 19.6 mm):上:頂層;下:底層
詳情請見:
http://www.powerint.com/sites/default/files/product-docs/linkswitch-pl_family_datasheet.pdf

http://www.powerint.com/sites/default/files/PDFFiles/der322.pdf



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。