《電子技術應用》
您所在的位置:首頁 > 電源技術 > 解決方案 > NXPSSL21081LED驅動器參考設計

NXPSSL21081LED驅動器參考設計

2012-02-11
作者:NXP公司
</a>LED" title="LED">LED" title="LED">LED驅動器,效率高達95%,具有低成本的材料清單(BOM)和小的PCB占位面積,容易實現緊湊的解決方案. SSL2108x系列集成了欠壓鎖住(UVLO),前沿消隱(LEB),過流保護(OCP),繞組短路保護(SWP)和內部超溫保護(OTP).本文介紹了SSL2108X主要特性和優勢,方框圖,幾種應用電路以及SSL21081 LED驅動器參考板主要特性,電路圖和材料清單.

The SSL2108X is a range of high-voltage Integrated Circuits (ICs), intended to drive LED lamps in general lighting applications.

The main benefits of the product family are:

•Small Printed-Circuit Board (PCB) footprint, and compact solution

•High efficiency (up to 95 %)

•Ease of integration

•Low electronic Bill Of Material (BOM)

The product family is made of ICs with a range of internal HV switches for easy power scaling.

The ICs work as boundary conduction mode converters, typically in buck configuration. The IC range has been designed to start up directly from the HV supply by an internal high-voltage current source. Thereafter, the dV/dt supply is used with capacitive coupling from the drain, or any other auxiliary supply. This functionality provides full flexibility in the application design. The IC consumes 1.3 mA of supply current with an internal clamp limiting the supply voltage.

The ICs provide accurate output current control with LED current accuracy within 5%. The ICs can be operated using Pulse-Width Modulation (PWM) dimming and has many protection features including easy LED temperature feedback.

SSL2108X主要特性和優勢:

?LED driver IC family driving strings of LEDs from a rectified mains supply

?High-efficiency switch mode buck driver product family:

?Drivers with integrated 300 V (SSL21081 and SSL21082) or 600 V (SSL21083 and SSL21084) power switches

?Controller with power-efficient boundary conduction mode of operation with:

?No reverse recovery losses in freewheel diode

?Zero Current Switching (ZCS) for turn-on of switch

?Zero voltage or valley switching for turn-on of switch

?Minimal required inductance value and size

?Direct PWM dimming possible

?Fast transient response through cycle-by-cycle current control:

?Negligible AC mains ripple at LED current and minimal total capacitor value

?No over or undershoots in the LED current

?No binning on LED forward voltage required

?Internal Protections:

?UnderVoltage LockOut (UVLO)

?Leading-Edge Blanking (LEB)

?OverCurrent Protection (OCP)

?Short-Winding Protection (SWP)

?Internal OverTemperature Protection (OTP)

?Brownout protection

?Output Short Protection (OSP)

?Low component count LED driver solution:

?No Schottky diode required due to ZCS

?No dim switch and high-side driver required for PWM dimming

?Easy external temperature protection with a single NTC resistor

?Option for soft-start function

?Compatible with wall switches with built-in indication light during standby1

?IC lifetime easily matches or surpasses LED lamp lifetime

SSL2108X應用:

SSL2108X products are intended for compact LED lighting applications with accurate fixed current output for single mains input voltages. Mains input voltages include 100 V, 120 V and 230 V (AC). The output signal can be modulated using a PWM signal.

圖1.SSL2108X方框圖

圖2.SSL2108X基本應用框圖(SO8型)

圖3.SSL21081/83降壓配置圖

SSL21081 LED驅動器參考板

This document describes the performance, technical data and connection of the SSL21081 reference board. The SSL2108X series is an NXP Semiconductors driver IC intended to provide a low cost, small form factor LED driver. This board is intended to operate at 100 V (AC) or 120 V (AC), using an output voltage greater than 30 V.

The SSL21081 is a highly integrated switching mode LED driver which enables constant current driving from the AC mains input in a standard SO8 package. It is a solution for small LED retrofit lamp applications, especially those applications for low-power factor designs.

The SSL21081 supports buck converter topology and is suitable for non-isolated, non-dimmable LED retrofit lamps. It can drive a long LED string, up to a 70 V forward voltage and is most efficient in this type of LED module. The SSL2108 series is intended to operate at high output voltages.

This reference board is an example that can be used in applications up to E17 form factor lamp fittings.

This reference board is connected to a high AC voltage. Avoid touching the reference board during operation. An isolated housing is mandatory when used in uncontrolled, non-laboratory environments. Galvanic isolation of the mains phase using a fixed or variable transformer (Variac) is always recommended.
 
圖4.SSL21081 LED驅動器參考板外形圖:左:頂視圖;右:底視圖

圖5.SSL21081 LED驅動器參考板電路圖

SSL21081 LED驅動器參考板材料清單:

詳情請見:
http://www.nxp.com/documents/data_sheet/SSL21081T_2T_3T_4T.pdf

http://www.nxp.com/documents/user_manual/UM10482.pdf



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。