《電子技術應用》
您所在的位置:首頁 > 電源技術 > 解決方案 > AustriamicrosystemsAS3610USB兼容鋰電池充電解決方案

AustriamicrosystemsAS3610USB兼容鋰電池充電解決方案

2012-01-31
作者:Austriamicrosystems公司

Austriamicrosystems公司的AS3610/11是USB兼容的降壓鋰電池充電器,1.25A 3MHz DC/DC充電器,100/500mA USB電流限制,其它電流限制900A,可通過OTP ROM編程.充電器還能產生用于USB OTG的5.05V輸出電壓,22V過壓保護,主要用在手機和手持設備的單個鋰電池充電器.本文介紹了AS3610/11主要特性,方框圖, USB檢測框圖以及AS3610-DB演示板電路圖和PCB布局圖.

AS3610/11: USB Compliant Step Down Charger for Li -Ion Portable Devices

The AS3610/11 is a highly integrated standalone or optional I2C controlled step down charger. All supervision and regulation functions are realized internal and independent from the processor.

The 100/500mA USB current limit can be set via a dedicated control pin. Other limits like 900mA can be programmed in the OTP ROM. In addition, the Charger can generate a 5.05V output supply at VBUS for USB OTG.

AS3610 features an I2C interface which can be used by a microcontroller to fully control all functionality of the chip. Charging current and EOC current can be set with external resistors and adjusted via register settings if needed.

AS3611 is a stand-alone version of this charger IC. Charging and EOC current is set by resistor only. Functions like OTG boost mode or max current limit for wall adapter mode can be enabled using dedicated pins.

AS3610/11主要特性:

??DCDC USB Charger

??1.25A, 3MHz DCDC Charger

??OTG Boost with low IQ (700;A) up to 500mA

??22V over voltage protection

??Seamless 100% Mode

??Reverse Polarity protection on VBUS

??NTC support

??Low side LED driver

??No external shunt resistor required

??“No Battery” operation without voltage drop

??Package: MLPD14 3x3mm

The AS3610/11 device serves as a standalone battery charge controller supporting rechargeable Lithium Ion (Li+) batteries. Requiring only a few external components, a full-featured battery charger with a high degree of flexibility can easily be realized. The main features of the controller are:

??Charge adapter detection

??Internal voltage regulator

??Low current (soft) charging

??Low current (trickle) charging

??Constant current charging

??Constant voltage charging

??22V input overvoltage protection

??Battery presence indication

??Operation without battery

??Input current limitation

??Input voltage drop regulation

AS3610/11應用:

The device is ideal as 1 Cell Li+ charger for mobile phones and portable devices.

圖1.AS3610方框圖

圖2.AS3611方框圖

圖3.AS3611 USB檢測框圖

AS3610-DB演示板

The AS3610-DB demoboard allows you to easily evaluate the principle functionality of the AS3610 battery charger. All settings can be done either direct on the board or via the included GUI software.


圖4.AS3610-DB演示板外形圖

圖5.AS3610-DB演示板電路圖


圖6.AS3610-DB演示板PCB布局圖:上:頂層,下:底層
詳情請見:
http://www.austriamicrosystems.com/content/download/186083/835337/103595



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。