</a>LED" title="LED">LED" title="LED">LED驅動器，并提供有源功率因素修正（PFC），既可用于隔離（如反激）和非隔離（如降壓）配置。MAX16841采用恒定頻率控制技術以得到最大化的效率，通用輸入電壓90V 到264V AC，主要用在帶TRIAC調光的LED燈，通用輸入LED燈，工業和商業照明，住宅區LED照明等。本文介紹了MAX16841主要特性，方框圖，非隔離（降壓）和反激拓?fù)鋱D，以及反激和降壓與降壓-升壓LED驅動器電路圖。
Offline LED Driver Provides Smooth Dimming and Maximizes Efficiency
The MAX16841 is an LED driver for AC line (100V, 120V, 220V, and 230V AC) input lamps. It features proprietary control of the input current that allows lamps to dim smoothly from full to zero light intensity, while providing active power factor correction (PFC). It is a very flexible product that can be used in isolated (e.g., flyback) and nonisolated (e.g., buck) configurations. The conventional use of an optocoupler in isolated configurations can be avoided in MAX16841-based designs.
The constant frequency-control technique of the device allows maximization of the conversion efficiency at both low and high AC line by operating at the conduction mode that minimizes total conduction and switching losses.
The device can be configured for universal input (90V to 264V AC) dimmable applications, allowing the design of an LED lamp that can be operated and dimmed worldwide.
This device can be used without electrolytic capacitors, thus maximizing the lamp lifetime. In this case, the LED current is a rectified sinusoid with a frequency that is twice the AC line frequency.
The device also features thermal shutdown, current limit, open LED protection, and VCC undervoltage lockout. The MAX16841 is available in an 8-pin SO package and operates over the -40NC to +125NC temperature range.
MAX16841主要特性：
Smooth Dimming with Leading-Edge (Triac) and Trailing-Edge Dimmers
Active Power Factor Correction
Nonisolated (e.g., Buck) and Isolated (e.g., Flyback) Topologies
Universal 90V to 264V AC Input Range
Constant Frequency-Control Scheme Maximizes Efficiency at High and Low AC Line Voltage
Constant Power Control with No Need for Optocouplers
Very-Low Quiescent Current
Output Open and Short Protection
Thermal Shutdown
Available in an 8-Pin SO Package
MAX16841應用：
Retrofit LED Lamps with Triac Dimming
Universal Input LED Retrofit Lamps
Industrial and Commercial Lighting
Residential LED Lighting
圖1。MAX16841方框圖
圖2。MAX16841非隔離（降壓）拓?fù)鋱D
圖3。MAX16841反激配置圖
圖4。MAX16841反激LED驅動器
圖5。MAX16841降壓LED驅動器
圖6。MAX16841降壓-升壓LED驅動器
詳情請見：
http://datasheets.maxim-ic.com/en/ds/MAX16841.pdf
Offline LED Driver Provides Smooth Dimming and Maximizes Efficiency
The MAX16841 is an LED driver for AC line (100V, 120V, 220V, and 230V AC) input lamps. It features proprietary control of the input current that allows lamps to dim smoothly from full to zero light intensity, while providing active power factor correction (PFC). It is a very flexible product that can be used in isolated (e.g., flyback) and nonisolated (e.g., buck) configurations. The conventional use of an optocoupler in isolated configurations can be avoided in MAX16841-based designs.
The constant frequency-control technique of the device allows maximization of the conversion efficiency at both low and high AC line by operating at the conduction mode that minimizes total conduction and switching losses.
The device can be configured for universal input (90V to 264V AC) dimmable applications, allowing the design of an LED lamp that can be operated and dimmed worldwide.
This device can be used without electrolytic capacitors, thus maximizing the lamp lifetime. In this case, the LED current is a rectified sinusoid with a frequency that is twice the AC line frequency.
The device also features thermal shutdown, current limit, open LED protection, and VCC undervoltage lockout. The MAX16841 is available in an 8-pin SO package and operates over the -40NC to +125NC temperature range.
MAX16841主要特性：
Smooth Dimming with Leading-Edge (Triac) and Trailing-Edge Dimmers
Active Power Factor Correction
Nonisolated (e.g., Buck) and Isolated (e.g., Flyback) Topologies
Universal 90V to 264V AC Input Range
Constant Frequency-Control Scheme Maximizes Efficiency at High and Low AC Line Voltage
Constant Power Control with No Need for Optocouplers
Very-Low Quiescent Current
Output Open and Short Protection
Thermal Shutdown
Available in an 8-Pin SO Package
MAX16841應用：
Retrofit LED Lamps with Triac Dimming
Universal Input LED Retrofit Lamps
Industrial and Commercial Lighting
Residential LED Lighting
圖1。MAX16841方框圖
圖2。MAX16841非隔離（降壓）拓?fù)鋱D
圖3。MAX16841反激配置圖
圖4。MAX16841反激LED驅動器
圖5。MAX16841降壓LED驅動器
圖6。MAX16841降壓-升壓LED驅動器
詳情請見：
http://datasheets.maxim-ic.com/en/ds/MAX16841.pdf
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。