《電子技術應用》
您所在的位置:首頁 > 嵌入式技術 > 解決方案 > Freescale Kinetis K60低功耗MCU TWR-K60N512-KIT開發方案

Freescale Kinetis K60低功耗MCU TWR-K60N512-KIT開發方案

2011-10-13
關鍵詞: 開發工具 kinetis MCU ECG

Freescale 公司的Kinetis K60系列是低功耗MCU,工作電壓1.71-3.6V,閃存的寫電壓為1.71-3.6V,采用高達100MHz的ARMRCortex™-M4內核,其性能可達到1.25 Dhrystone MIPS per MHz,同時可選擇浮點單元, IEEE 1588以太網,USB 2.0 OTG,加密和篡改檢測,具有極好的性能,環境溫度為-40 到105°C,主要用在工業如安全照相機, 建筑物自動化控制和電梯控制屏以及醫療電子如心電圖(ECG),生命信息監測儀,運程醫療保健系統,心率監視器, 除顫儀, 麻醉監視器, 呼吸機等.本文介紹了K60系列主要特性,方框圖, TWR-K60N512-KIT K60系列開發套件主要特性,方框圖和電路圖.

Kinetis K60: Low-Power MCU with optional Floating Point Unit, Ethernet, USB, Encryption and Tamper Detect

Kinetis is the most scalable portfolio of low power, mixedsignal ARMRCortex™-M4 MCUs in the industry. Phase 1 of the portfolio consists of five MCU families with over 200 pin-,peripheral- and software-compatible devices. Each family offers excellent performance, memory and feature scalability with common peripherals, memory maps, and packages providing easy migration both within and between families.

Kinetis MCUs are built from Freescale’s innovative 90nm Thin Film Storage (TFS) flash technology with unique FlexMemory. Kinetis MCU families combine the latest lowpower innovations and high performance, high precision mixed-signal capability with a broad range of connectivity, human-machine interface, and safety & security peripherals.Kinetis MCUs are supported by a market-leading enablement bundle from Freescale and numerous ARM 3rd party ecosystem partners.

The K60 MCU family includes IEEE 1588 Ethernet, full- and high-speed USB 2.0 On-The-Go with device charger detect capability, hardware encryption and tamper detection capabilities. Devices start from 256 KB of flash in 100LQFP packages extending up to 1 MB in a 256MAPBGA package with a rich suite of analog, communication, timing and control peripherals.

High memory density K60 family devices include an optional single precision floating point unit, NAND flash controller and DRAM controller.

K60系列主要特性:

• Operating Characteristics

– Voltage range: 1.71 to 3.6 V

– Flash write voltage range: 1.71 to 3.6 V

– Temperature range (ambient): -40 to 105°C

•Performance

Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone  MIPS per MHz

•Memories and memory interfaces

– Up to 512 KB program flash memory on non- FlexMemory devices

– Up to 256 KB program flash memory on FlexMemory devices

– Up to 256 KB FlexNVM on FlexMemory devices

– 4 KB FlexRAM on FlexMemory devices

– Up to 128 KB RAM

– Serial programming interface (EzPort)

– FlexBus external bus interface

•Clocks

– 3 to 32 MHz crystal oscillator

– 32 kHz crystal oscillator

– Multi-purpose clock generator

•System peripherals

– 10 low-power modes to provide power optimization based on application requirements

– Memory protection unit with multi-master protection

– 16-channel DMA controller, supporting up to 64 request sources

– External watchdog monitor

– Software watchdog

– Low-leakage wakeup unit

•Security and integrity modules

– Hardware CRC module to support fast cyclic redundancy checks

– Hardware random-number generator

– Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms

– 128-bit unique identification (ID) number per chip

•Human-machine interface

– Low-power hardware touch sensor interface (TSI)

– General-purpose input/output

•Analog modules

– Two 16-bit SAR ADCs

– Programmable gain amplifier (PGA) (up to x64) integrated into each ADC

– 12-bit DAC

– Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input

– Voltage reference

•Timers

– Programmable delay block

– Eight-channel motor control/general purpose/PWM timer

– Two 2-channel quadrature decoder/general purpose timers

– IEEE 1588 timers

– Periodic interrupt timers

– 16-bit low-power timer

– Carrier modulator transmitter

– Real-time clock

• Communication interfaces

– Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability

– USB full-/low-speed On-the-Go controller with on-chip transceiver

– Two Controller Area Network (CAN) modules

– Three SPI modules

– Two I2C modules

– Five UART modules

– Secure Digital host controller (SDHC)

– I2S module

Kinetis K60系列目標應用:

Industrial

Security Cameras

Building Automation Controllers

Control Panels (Elevator)

Medical

Heart Rate Monitors 

Telehealth System 

Electrocardiograph (ECG) 

Anesthesia Unit Monitor 

Vital Signs Monitors 

Ventilators and Respirators 

Defibrillators 

圖1. Kinetis K60系列方框圖

TWR-K60N512-KIT K60系列開發套件

TWR-K60N512-KIT: Development Kit for Kinetis K60 Family

The TWR-K60N512 is a Tower Controller Module compatible with the Freescale Tower System. It can function as a stand-alone, low-cost platform for the evaluation of the Kinetis K10, K20 and K60 family of microcontroller (MCU) devices. The TWR-K60N512 features the Kinetis K60 low-power microcontroller based on the ARM® Cortex™-M4 architecture with USB 2.0 full-speed OTG controller and 10/100 Mbps Ethernet MAC.

The TWR-K60N512 is available as a stand-alone product or as a kit (TWR-K60N512-KIT) with the Tower Elevator Modules (TWR-ELEV) and the Tower Serial Module (TWR-SER). The TWR-K60N512 can also be combined with other Freescale Tower peripheral modules to create development platforms for a wide variety of applications. 0 provides an overview of the Freescale Tower System.

圖2. Tower System系統外形圖

TWR-K60N512-KIT K60系列開發套件包括:

TWR-K60N512 MCU module

TWR-ELEV – Primary and Secondary Elevator Modules

TWR-SER – Serial module including USB host/device/OTG, Ethernet, CAN, RS232 and RS485

The TWR-K60N512 is a Tower Controller Module featuring the MK60N512VMD100—an ARM Cortex-M4 based microcontroller with segment LCD and USB 2.0 full-speed OTG controllers in a 144 MAPBGA package with a maximum core operating frequency of 100MHz. It is intended for use in the Freescale Tower System but can operate stand-alone. An on-board debug circuit, OSJTAG, provides a JTAG debug interface and a power supply input through a single USB mini-AB connector.


圖3. TWR-K60N512外形圖(正面)

圖4. TWR-K60N512框圖

圖5. TWR-K60N512電路圖(1)

圖6. TWR-K60N512電路圖(2)

圖7. TWR-K60N512電路圖(3)

圖8. TWR-K60N512電路圖(4)

圖9. TWR-K60N512電路圖(5)
詳情請見:
http://cache.freescale.com/files/microcontrollers/doc/data_sheet/K60P100M100SF2.pdf?fpsp=1&WT_TYPE=Data
Sheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=TWR-K40X256-KIT
以及
http://cache.freescale.com/files/32bit/doc/ref_manual/TWR-K60N512-UM.pdf?fpsp=1



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。